Friday, February 8, 2019

LAN networking :: essays research papers

If you necessitate to add additional computers to your vane in the future, all you privation atomic human action 18 more earnings Interface Cards and 10BaseT cables. Simply plug the young net income cods(s) into your computer an run a cable form the card to one of the hubs open ports.For even greater expandability, the hub can be joined, or uplinked, to other hubs. If you look closely at the front of the hub, you go away see a port marked Uplink. To uplink a hub, simply present a standard, straight-through 10BaseT cable between the Workgroup Hubs Uplink port and any of another(prenominal) hubs regular 10BaseT ports. A maximum of three hubs can be connected together.For example, like most hubs, a 5-Port Hubs port number 5 and Uplink port are joined internally. This means that when port 5 is in use, the uplink port cannot be used, and vice-versa. If you plan on using the uplink port, youll need to disconnect any cables that are connected to port 5.Setting up your engagement cards software involves demonstrateing a profits driver onto your computer. The driver will allow the card to communicate with your Network Operating System (NOS). Software package. Some of these NOS include Windows for Workgroups, Windows 95/98, Windows NT, and Novell. wholly the network cards that you buy should come with a 3.5 software record where it includes drivers for different NOS. They should also have instructions on how to install them, further this hand out will help you understand and teach you how to install drivers.After installing your network card hardware in your computer, take note the instructions below to install the cards software.1.Install the network card hardware if you havent already2.Start up your computer and Windows 95/98.3.Windows 95/98 will automatically mention the presence of your network card hardware in your computer.If Windows 95/98 goes immediately to the windows desktop, and does not display a new hardware discover message. Go to my co mputer control panel system device omnibus tab select the network adapter and remove it from the list resume computer and you should get a windows asking for drivers. Important When you reboot Windows 95/98 may ask you for the Operating System CD ROM. please provide them as necessary.4. Windows 95/98 will detect your network card and display a New Hardware Found window as shown bellow5. Put your 3.5 in drive A with the network card drivers that came with the it.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.